Digital Darkroom Latest

Rihac Ink Set for the Epson Stylus Pro 3880 Printer

Rihac Ink Set for the Epson Stylus Pro 3880 Printer

In abstract

Rihac refillable cartridge sets aren’t meant for everybody. They don’t seem to be appropriate for those who only print prints at occasions, and are usually not suitable for people who do not need to refill their colours and commonly verify their inks. For those who agree on either of those classes, you must in all probability give them a disorder.

We also advocate that you simply wait for your printer to be out of guarantee since you can’t anticipate the producer to help the used gadget

Nevertheless, for those who are prepared to make an effort, the Rihac system can get rid of the have to recycle empty cartridges and in addition get monetary savings in the long term.

Full Assessment

We attempt to attenuate the quantity of plastic waste we produce, and research the "starter kits" of refillable cartridges provided by Rihac Enterprises for a variety of well-liked desktop printers. In recent times, we’ve got collected cardboard with empty cartridges which were troublesome to recycle. The photographer's pal's advisor, who has used Rihac inks for 3880 printers for a couple of years without problems, bought the collection for the 3880 at the starting of 2018.

Rihac Collection for Epson 3880 A2 Printer. (Source: Rihac Enterprises.)

Drawback definition
Plastic waste is an pressing drawback for each companies and shoppers worldwide. Over the previous 6-12 months, we now have bombarded the message about the need to scale back plastic waste. Most of this was as a consequence of China refusing to simply accept waste in western nations in July 2017.

Since then, we’ve left a problem: how can we scale back our investment on this drawback? The start line is that buyers around the world assist nations cope with greater than eight million tons of plastic waste that clogs dumps and arrives in oceans.

Although the ink cartridges are empty, they type a small a part of the bulk of our office waste.

Although there’s a system in Australia for amassing empty cartridges that Planet Ark has established and supported by major printer producers, it does not necessarily settle for 80 ml and bigger cartridges. A lot is dependent upon what you are attempting to drop them.

In concept, it is best to have the ability to take empty cartridges to any Officeworks store, in addition to "participating" Australia Submit, Harvey Norman, The Good Guys, JB Hi-Fi, Workplace Nationwide and Office Products Depot shops. The catch is "participant" because some stores don’t take cartridges in any respect, whereas some use only 8-11 ml cartridges used by workplace buttons. 80 ml cartridges utilized by giant printers are often not accepted

So what might be carried out?

Refillable Choice
We found an alternative choice to the Rihac alternative package, which includes a lot of empty cartridges that match into a large desktop printer, as well as the inks and tools it’s essential refill cartridges. Rihac cartridges might be positioned in the printer alongside branded merchandise and – when you have set the whole lot proper – the printer should not be forgotten.

Because we’ve put in a system that we’ve been capable of say farewell to find a place to drop empty cartridges as a result of it's straightforward to simply maintain Rihac cartridges updated.

Although we recognize that OEM OEM cartridges are all the time the most popular choice for printer producers, additionally they acknowledge the want to supply extra environmentally friendly options. Each Epson and Canon (market leaders) have bought printers with refillable ink cartridges for a few years, and Canny shoppers and businesses are nicely aware that, although they could pay extra prematurely, they offer helpful savings on ink and recycling costs

Sadly, all refillable printers are they’ve four-color CMYK models and haven’t any guarantee that their inks will probably be color-specific or durable enough to print pictures. Epson does a couple of six-ink photograph printers (L1800, L805 and L850), but they don’t seem to be bought in Australia and we now have not been capable of get the particulars about ink resistance.

If you’d like an A3 or larger printer with a lightweight system, Rihac kits are the solely choice.

There are some necessary warnings to think about earlier than buying a Rihac package. Think about these elements when deciding whether or not to make use of the product – as a result of it isn’t suitable for everyone.

  1. It isn’t value shopping for a package deal in the event you print solely sometimes. (This additionally applies to purchasing a large-sized printer as a result of the worth needs to be removed for many years.)
  2. Consumers are warned that Rihac inks are usually not accepted or manufactured by Epson and users Keep in mind that using third-party inks might void the printer's guarantee. Given the age of the printer, the incontrovertible fact that it isn’t beneath warranty and with the expertise of our colleague, was able to take the danger.
  3. These kits are solely appropriate for technically committed and qualified individuals. Although the instructions offered are quite complete, they have to be adopted by a letter, and refilling ink cartridges with ink could be confusing and typically messy.

What is obtainable?
Once we checked the Rihac website we found, they discovered two forms of resin capsules packed in containers of different sizes. Based on Rihac, inks of 100 ml bottles are made by the manufacturer of chemical compounds, Cabots, whose product vary consists of ink jet dyes.

Another sort, contained in 250 ml bottles, is made in a British Diamond dispersion. focuses on inkjet printers. Rihac tells us that each inks are thought-about premium products, but the Diamond product is more more likely to swell with heat and time.

Other variations between the two packages are effective. Each ink units are filtered by means of osmosis and both have the similar colour scheme and longevity scores as Epson's unique inks.

We decided to choose a 100 ml starter package, partly because it costs less, however primarily because it’s closer to the cassettes utilized in the 80 ml volume 3880 printer. Once we bought the package deal in mid-February 2018, the 100-ml starter pack for 3880 was $ 530, whereas the 250-ml package deal was $ 900. Apparently, these costs have been nonetheless utilized when this evaluation was revealed.

Comparable packages can be found on most Epson large-format printers, from Positive Colour SC-P600 to Stylus Pro 9900 (which uses 700 ml cartridges). The only Canon printer at present supported is the Pixma PRO9000 A3 + model

The Stylus Pro 3880 Starter Package consists of the following elements: nine refillable toner cartridges with easy-to-restore chips and a screwdriver to switch the chip cover cowl, one bottle of ink for every ink shade utilized by the printer ( 9 bottles), one needle and syringe box for every cartridge (9), instruments for every cartridge, and comprehensive instructions for using the package deal. 19659003]
Each package deal is delivered in a packet with a protective bubble seal to stop injury to the bottles, leading to ink leakage.

Consumers have to remove chips from present Epson cartridges and place them on a corresponding refillable cartridge. This have to be achieved when the cassette first exhibits its ink out. Ready till the cassette is empty and reinserting the cassette, which makes it unusable when the cassette is crammed.

Utilizing the Package
Earlier than you open the package deal, it is advisable perform a nozzle examine to see if the printheads work effectively. If there are gaps in the printout, comply with the print head to wash and print the output. Cover your worktop in a newspaper to absorb (which is nearly inevitable once you first fill the cartridge) and use thin rubber gloves to keep your fingers from staining.

OEM ink cartridges must be changed whenever you obtain the first “low ink signal from the ink display. For those who depart it much additional, there’s a danger that the chip will probably be set to empty again and turn into unreadable.

Verify the empty cartridge to make sure that no cracks or different injury has occurred in the cargo (unlikely as a result of the packaging we acquired was nicely packed for wrapping the bubbles around the cartridges and ink bottles). Make certain the black fill plug and orange air plug are in place as proven in the figure under

An empty Rihac cartridge that exhibits an automated reset and an orange air plug. The black refill plug is at the finish of the cartridge indicated by the lower arrow.

Ensure that the refillable toner cartridge has the similar colour as the alternative cartridge. That is necessary because the cartridges are shade specific and don’t work until they are hooked up to the right refillable cartridge.

Remove the virtually empty OEM cartridge from the printer and use a sharp blade to chop two plastic covers that hold the chip in place. Rigorously flip off the chip (do not try and twist it, this will likely injury the electronics).

Eradicating an automated reset circuit from a cartridge.

Use the screwdriver ideas lever upwards in the L-shaped ARC (Automated Reset) construction, situated toward the entrance of the refillable toner cartridge. Open the Epson chip that you’ve eliminated beneath the fringe of the exposed container, be sure that the gold contact surfaces are ahead as shown in the illustration under.

Inserting an Epson chip from an virtually empty cartridge

Before trying to fill the cartridge, it’s essential to remove the black refill connector situated under the cartridge label (proven in the illustration under). Don’t eliminate it as you want it once more when the cartridge is inserted. Ensure that the orange plug continues to be in place

The syringes are shade coded, so choose the one which matches the colour of the used ink. Connect the needle to the syringe, gently shake the bottle to make sure that the pigment particles are in suspension and evenly dispersed, unscrew the bottle cap and gently insert the hole into the metallic housing and insert the tip of the needle. Pull the plunger into a syringe filled with ink.

Rigorously insert the needle tip into the gap with the filler plug and slowly push the ink into the cartridge. We discovered that the cartridge is at a slight angle, so we supported it on the empty cartridge. Repeat this process till the cassette is about 80% full, ensuring that the cassette slope increases as you feed extra ink so that it can’t leak by means of the filler hole.
After you’ve got enough ink, substitute the filler cap and remove the orange plug. Hold this plug if you need it if you need to refill the ink.

Remove the needle from the syringe and substitute it with the pre-filled syringe. The priming process is designed to take away all air from the feed strains that take the ink into the printer. If the air passes into these strains, the printer won’t work and you will have to service it (which is dear)

Cassette Preprocessing

Rigorously place the base plate to attach the ink outlet at the opposite end of the cartridge to the label. Be sure to insert the tip absolutely so as to open the spring seal. Slowly pull again the plunger of the syringe to remove air from the cartridge. You possibly can see when the air is removed because the ink flows into the syringe and the square window (shown under) fills the ink.

Examine that the orange plug is eliminated before putting in the new print cartridge. You’ll be able to substitute the unique print cartridges individually as a result of they are empty without compromising on quality or sturdiness.

It is good that the printer is used with the producer's inks and Rihac inks.

NOTE: Once you use Rihac toner cartridges, you can’t depend on the ink show once you display the cartridge. Examine the cartridges repeatedly and do not let the ink drop under about 20-30%. Dried cartridges permit air to enter the printer's supply strains – and require pricey service calls.

Please login or register to finish.


Package deal Contents: 9x 100ml Bottles Premium Resin Encapsulated Pigment Toner, 9x 80ml Alternative Containers with Intelligent Chips, Syringes, Needles and Reusable Plugs, Straightforward to Refill 9 primer device, device for putting in recoverable chips, detailed guide
Ink sort: Resin encapsulated pigment plastics
Toner cartridge capacity: 100 ml

Distributor: Rihac Enterprises, (03) 9005 5555;


OVH: 530 AU per Startup Package (for Epson 3880 Printer)

  • Ease of Use:
  • Print Quality: